Mining tank monitoring

Tank levels from the pit, without the drive.

Diesel, lubricant, coolant and process fluid tanks spread across pits, camps and haul roads. Units report over 4G where there is coverage and over satellite where there is not, with no site power, Wi-Fi or cabling to arrange.

16+ years in remote monitoring6,000+ devices deployed4G and satellite
GAT sensor equipment being tested on a remote site
Why monitor remotely

Built for sites with no signal.

01

Satellite where there is no coverage

Each unit uses 4G where it can and switches to satellite where it cannot, so the most remote tank reports like the rest.

02

Nothing to connect to site IT

Units are self-contained and battery powered. There is no site network, power or cabling to organise, and no IT approval to chase.

03

Fewer trips to check a tank

Daily levels replace the drive out to dip a tank at the far end of a haul road, freeing people for real work.

04

One view for the mine and the supplier

Reports can be split by site, pit or contractor, and your fuel or lubricant supplier can see the tanks they keep full.

Applications

Mine site tanks we monitor

Bulk diesel and fuel farms

Large bulk storage tanks feeding the fleet, reported by site and tank.

Lube bays and containers

Engine, hydraulic and gear oils, coolant and grease in workshop and field lube bays.

Camp and generator tanks

Diesel feeding camp generators and remote power, so camps do not run short.

Mobile tanks and fuel trailers

Level and GPS location together, wherever the tank is moved to around the lease.

Process chemicals and water

Reagents, treatment chemicals and process or stock water tanks.

Something unusual

Sumps, process vessels and hard-to-reach tanks, with our engineering team designing the method.

01

Mine operators

For site, maintenance and supply teams responsible for keeping tanks full.

  • Daily levels for every tank on the lease
  • Reports split by pit, site or contractor
  • No site power, network or cabling
  • Rugged units: IP68, −20 to +80 °C
02

Suppliers to mine sites

For fuel and lubricant suppliers and contractors servicing remote sites.

  • See which site tanks need product
  • Plan long-haul deliveries on actual levels
  • Share each site’s report with the client
  • Satellite coverage where 4G ends
GAT monitoring unit installed on large tanks in a remote site
The daily report

What a mine site report looks like

One report for the whole lease, or one for each pit and contractor. Times are shown in the local time of each site.

Tank nameProductLitres remaining (L)SFL (L)Percentage (%)
Pit 3 fuel farm: Tank 1, DieselDiesel86,300110,000
78
Pit 3 fuel farm: Tank 2, DieselDiesel42,700110,000
38
Main workshop: Hydraulic oilHydraulic oil1,8802,850
66
Camp generator tankDiesel1,5209,500
16

Example report with illustrative data. Times are shown in the local time of each site.

Try the interactive report, viewed as a supplier or as each customer

The unit

Self-contained. Nothing to wire up.

A submersible pressure sensor measures the level, and the unit reports level and GPS location over 4G or satellite. It fits through an existing opening on the tank, with no drilling, welding, site power or cabling.

4G + satellite
chosen automatically
7 years
battery life
IP68
protection rating
−20 to +80 °C
operating range
5 to 10 min
typical install
Any size
fixed or mobile tank
Questions

Mining tank monitoring: common questions

Does the unit need to connect to the site network?
No. Each unit has its own 4G and satellite connection and its own battery, so there is nothing to connect to site IT, power or Wi-Fi.
What happens where there is no mobile coverage?
The unit reports over satellite instead. It chooses between 4G and satellite on its own, including while a mobile tank moves around the site.
Will the units cope with site conditions?
Units are rated IP68 and operate from −20 to +80 °C, with a battery life of up to seven years.
Who installs units on a remote site?
Most installs take 5 to 10 minutes through an existing opening on the tank, so site staff can fit them. GAT and our installation partners can also install them for you.
Can our contractor and our supplier see the reports?
Yes. Reports can be split by site, pit, division or contractor, and each recipient sees only the tanks they are responsible for.
Get in touch

Book a tank assessment

Tell us about your tanks and sites. Our team will be in touch within one business day to talk through what you need.

Call our team+61 485 056 703Emailsales@gat.solutions

Request a quote

fields are needed to reply. Everything else is optional.

We reply within one business day.

CallGet a quote